My scrapbook about anything which I learned or want to remember, Sometime about tech tips, thoughts and rambling. If you find anything useful don't forget to give thumbs-up :)

Breaking

Tuesday, October 6, 2015

dsjob #2 - Managing Datastage Jobs from Command Line


Continued from dsjob - Managing Datastage Jobs from Command Line #1






Listing Projects, Jobs, Stages, Links, and Parameters :



We can list projects, jobs, stages, links, and job parameters using the

dsjob command. The different versions of the syntax are described in
the following sections.

The following syntax works for listing information about a Datastage job as below:

  •     dsjob –lprojects         ---List of all projects
  •     dsjob –ljobs project    ---List of all Jobs under a project
project is the name of the project containing the jobs to list.


  •     dsjob –lstages [useid] project job|job_id --- List of all stages in a job
1.    useid specify this if we intend to use a job alias (jobid) rather than a
2.    job name (job) to identify the job.
3.    project is the name of the project containing job.
4.    job is the name of the job containing the stages to list. To identify a
5.    job invocation, use the format job.invocation_id.
6.    job_id is an alias for the job that has been set using the dsjob -jobid
7.    command


  •     dsjob –links [useid] project job|job_id stage  --- List of the links within a job design
1.    useid specify this if we intend to use a job alias (jobid) rather than a
2.    job name (job) to identify the job.
3.    project is the name of the project containing job.
4.    job is the name of the job containing stage. To identify a job
5.    invocation, use the format job.invocation_id.
6.    job_id is an alias for the job that has been set using the dsjob -jobid
7.    stage is the name of the stage containing the links to list.


  •     dsjob –lparams [useid] project job|job_id  ---List of all parameters used within a Job



Setting an Alias for a Job:


The dsjob command can be used to specify own ID for a

DataStage job.Other commands can then use that alias to refer to the
job.

Syntax: dsjob –jobid [my_ID] project job


Explanations of the available options

  1. my_ID is the alias we want to set for the job. If we omit my_ID, the command will return the current alias for the specified job. An alias must be unique within the project, if the alias already exists an error message is displayed project is the name of the project containing job.
  2. job is the name of the job. To identify a job invocation, use the format job.invocation_id

    
Retrieving Information:

The dsjob command can be used to retrieve and display the available information about specific projects, jobs, stages, or links. The different

versions of the syntax are described in the following sections.

Displaying Job Information


Syntax: dsjob –jobinfo [useid] project job|job_id


Explanations of the available options:

  1. useid specify this if we intend to use a job alias (jobid) rather than a job name (job) to identify the job.
  2. project is the name of the project containing job.
  3. job is the name of the job. To identify a job invocation, use the format job.invocation_id.

The following information is displayed:
  1. The current status of the job
  2. The name of any controlling job for the job
  3. The date and time when the job started
  4. The wave number of the last or current run (internal DataStage reference number)
  5. User status

Displaying Stage Information:

Syntax: dsjob –stageinfo [useid] project job|job_id stage


Explanations of the available options:

  1. useid specify this if we intend to use a job alias (jobid) rather than a
  2. job name (job) to identify the job.
  3. project is the name of the project containing job.
  4. job is the name of the job containing stage. To identify a job
  5. invocation, use the format job.invocation_id.
  6. job_id is an alias for the job that has been set using the dsjob -jobid command.
  7. stage is the name of the stage.

The following information is displayed:
  1. The last error message reported from any link to or from the stage
  2. The stage type name, for example, Transformer or Aggregator
  3. The primary links input row number

Displaying Link Information:

Syntax: dsjob –linkinfo [useid] project job|job_id stage link


Explanations of the available options:

  1. useid specify this if we intend to use a job alias (jobid) rather than a
  2. job name (job) to identify the job.
  3. project is the name of the project containing job.
  4. job is the name of the job containing stage. To identify a job
  5. invocation, use the format job.invocation_id.
  6. job_id is an alias for the job that has been set using the dsjob -jobid command. 
  7. stage is the name of the stage containing link.
  8. link is the name of the stage.

The following information is displayed:
  1. The last error message reported by the link
  2. The number of rows that have passed down a link


Accessing Log Files:



Adding a Log Entry

Syntax: dsjob –log [–info | –warn] [useid] project job|job_id



Explanations of the available options:
  1. info specifies an information message. This is the default if no log entry type is specified.
  2. -warn specifies a warning message.
  3. useid specify this if we intend to use a job alias (jobid) rather than a
  4. job name (job) to identify the job.
  5. project is the name of the project containing job.
  6. job is the name of the job that the log entry refers to. To identify a job invocation, use the format job.invocation_id.
  7. job_id is an alias for the job that has been set using the dsjob -jobid command.

Displaying a Short Log Entry

Syntax: dsjob –logsum [–type type] [ –max n ] [useid] project job|job_id


type specifies the type of log entry to retrieve.

If –type is not specified, all the entries are retrieved.


Importing Job Executables:

The dsjob command can be used to import job executables from a

DSX file into a specified project.

Syntax: dsjob –import project DSXfilename [-OVERWRITE] [-JOB[S] jobname …] |[-LIST]



  1.  DSXfilename is the DSX file containing the job executables.
  2. -OVERWRITE specifies that any existing jobs in the project with the same name will be overwritten.
  3. -JOB[S] jobname specifies that one or more named job executables should be imported (otherwise all the executable in the DSX file are imported).
  4. -LIST causes DataStage to list the executables in a DSX file rather than import them.

Generating a Report:

The dsjob command can be used to generate an XML format report

containing job, stage, and link information.

Syntax: dsjob –report [useid] project job|job_id [report_type]


Report_type is one of the following:


 BASIC – Text string containing start/end time, time elapsed and status of job.

 DETAIL – As basic report, but also contains information about individual stages and links within the job.
 LIST – Text string containing



Examples are available HERE





Like the below page to get update  
https://www.facebook.com/datastage4you
https://twitter.com/datagenx
https://plus.google.com/+AtulSingh0/posts
https://groups.google.com/forum/#!forum/datagenx

No comments:

Post a Comment

Disclaimer

The postings on this site are my own and don't necessarily represent IBM's or other companies positions, strategies or opinions. All content provided on this blog is for informational purposes and knowledge sharing only.
The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of his information.